{"product_id":"ironclad-bench-press","title":"Ironclad Bench Press","description":"\u003ch3\u003e\u003cstrong\u003eProduct Info\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eIronclad Bench Press\u003c\/strong\u003e is a bench press and nothing else. The bench is not a separate pad wheeled into position between two uprights — it is \u003cstrong\u003ebuilt into the frame\u003c\/strong\u003e, bolted to the same base the uprights stand on, so the press is set up the same way every session and cannot drift out of line mid-set.\u003c\/p\u003e\n\u003cp\u003eThat is the difference between pressing in a rack and pressing on a dedicated station. A loose bench has to be squared up, centred and eyeballed for depth every time anyone moves it. Here the geometry is fixed, and the only thing left to set is the bar.\u003c\/p\u003e\n\u003cp\u003eThe uprights are \u003cstrong\u003enumbered end to end\u003c\/strong\u003e, and the hole pattern \u003cstrong\u003etightens through the pressing range\u003c\/strong\u003e — close spacing exactly where lift-off height and catch height have to be found, wider spacing above and below where they never are. Two lifters sharing the station call out a number instead of guessing, and come back to the same number next week.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJ-cups are standard\u003c\/strong\u003e, set on the same numbered pattern, and a \u003cstrong\u003epair of weight horns\u003c\/strong\u003e on the base keeps working plates off the floor and within reach of the lifter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpotter arms are an optional add-on\u003c\/strong\u003e, and are \u003cstrong\u003enot shown in the photographs\u003c\/strong\u003e. A pair \u003cstrong\u003epins into the uprights\u003c\/strong\u003e and then \u003cstrong\u003erotates down into a locking mechanism\u003c\/strong\u003e on the upright, so the arm is held in position rather than sitting on the pin alone — no tools, and off again in seconds. It catches a failed press without a spotter standing over the lifter. \u003cstrong\u003eFlipped down to store\u003c\/strong\u003e, the arms sit flush with the structure instead of protruding into the walkway or being carried off and lost.\u003c\/p\u003e\n\u003cp\u003eThe base is a wide bolt-together frame on four feet with rubber caps — free standing, no bolting down, and heavy enough that unracking from one side does not walk it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBarbell and plates are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eTechnical Specs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dedicated bench press station, free standing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBench:\u003c\/strong\u003e Flat, fixed to the frame — not a removable bench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUprights:\u003c\/strong\u003e Heavy-duty steel; numbered full height, close-spaced through the pressing range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter:\u003c\/strong\u003e Ø5\/8\" (Ø16 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar Supports:\u003c\/strong\u003e J-cup pair, standard, adjustable on the numbered pattern\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpotter Arms:\u003c\/strong\u003e Optional add-on — pin in, rotate down into the upright lock, flip down to store; not shown in the photographs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight Storage:\u003c\/strong\u003e 2 horns on the base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e Bolt-together frame, four feet with rubber caps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 50\" (1270 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 76.6\" (1945 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 72.2\" (1833 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation:\u003c\/strong\u003e Free standing; no floor fixing required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Powder coat, black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse Rating:\u003c\/strong\u003e Full commercial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBarbell and Plates:\u003c\/strong\u003e Not included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 3330002\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eShipping \u0026amp; Lead Time\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock and ready to ship.\u003c\/strong\u003e Orders leave the shop within \u003cstrong\u003e24 to 48 hours\u003c\/strong\u003e.\u003c\/p\u003e","brand":"Zeus Fitness","offers":[{"title":"Default Title","offer_id":50796113232065,"sku":"3330002","price":1795.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/1341\/9713\/files\/3330002_R01.jpg?v=1792530375","url":"https:\/\/www.zeusfitness.ca\/products\/ironclad-bench-press","provider":"Zeus Fitness BC","version":"1.0","type":"link"}