The Offset Bumper Plate Storage Peg carries the peg forward of the upright on its own arm, so loaded plates hang clear of the rack instead of alongside it. The rig can then stand against the wall rather than being pulled out to make room for the plates.
On a peg bolted straight to the post it is the diameter of the plate, not the length of the peg, that sets the gap: a 17-3/4" (450 mm) bumper reaches almost 9" past the upright in every direction, and that is the distance the rack has to stand off the wall. Moving the peg forward moves the whole circle with it, which is where the floor space comes back in a garage, a basement, or a studio built around its perimeter.
The peg bolts through a row of positions along the arm, so how far forward the plates sit is chosen at install and can be changed later - far enough out to clear the wall, no further than the room allows.
Stainless steel peg, powder-coated steel arm and mounting plate, bolt-through hardware included.
Bumper plates are not included.
Technical Specs
Type: Offset storage peg, rack mounted
Mounting: Bolt-through the upright, two bolts per peg; hardware included
Peg Position: Adjustable along the arm
Width Added: 23.4" (595 mm) per fitted end
Peg Material: Stainless steel
Arm & Mount Material: Steel
Finish: Powder coat black arm, brushed stainless peg
